垃圾焚烧炉厂家
免费服务热线

Free service

hotline

010-00000000
垃圾焚烧炉厂家
热门搜索:
技术资讯
当前位置:首页 > 技术资讯

Infineon XMC4500 MCU工业应用开发方案 免费猫

发布时间:2020-02-17 13:11:26 阅读: 来源:垃圾焚烧炉厂家

Infineon XMC4500 MCU工业应用开发方案

Event Request Unit (ERU) for programmable processing of external and internalservice requests

Flexible CRC Engine (FCE) for multiple bit error detection

On-Chip Memories

16 KB on-chip boot ROM

112 KB on-chip high-speed program memory

64 KB on-chip high speed data memory

32 KB on-chip high-speed communication

1024 KB on-chip Flash Memory with 4 KB instruction cache Communication Peripherals

Ethernet MAC module capable of 10/100 Mbit/s transfer rates

Universal Serial Bus, USB 2.0 host, Full-Speed OTG, with integrated PHY

Controller Area Network interface (MultiCAN), Full-CAN/Basic-CAN with 3 nodes, 64 message objects, data rate up to 1MBit/s

Six Universal Serial Interface Channels (USIC),providing 6 serial channels, usable as UART, double-SPI, quad-SPI, IIC, IIS and LIN interfaces

LED and Touch-Sense Controller (LEDTS) for Human-Machine interface

SD and Multi-Media Card interface (SDMMC) for data storage memory cards

External Bus Interface Unit (EBU) enabling communication with external memories and off-chip peripherals

Analog Frontend Peripherals

Four Analog-Digital Converters (VADC) of 12-bit resolution, 8 channels each, with input out-of-range comparators

Delta Sigma Demodulator with four channels, digital input stage for A/D signal conversion

Digital-Analogue Converter (DAC) with two channels of 12-bit resolution Industrial Control Peripherals

Two Capture/Compare Units 8 (CCU8) for motor control and power conversion

Four Capture/Compare Units 4 (CCU4) for use as general purpose timers

Two Position Interfaces (POSIF) for servo motor positioning

Window Watchdog Timer (WDT) for safety sensitive applications

Die Temperature Sensor (DTS)

Real Time Clock module with alarm support

System Control Unit (SCU) for system configuration and control

Input/Output Lines

Programmable port driver control module (PORTS)

Individual bit addressability

Tri-stated in input mode

Push/pull or open drain output mode

Boundary scan test support over JTAG interface

On-Chip Debug Support

Full support for debug features: 8 breakpoints, CoreSight, trace

Various interfaces: ARM-JTAG, SWD, single wire trace

Packages

PG-LFBGA-144

PG-LQFP-144

PG-LQFP-100

MC4000系列Hexagon 应用套件

CPU XMC4500通用板CPU_45A-V2

CPU Board XMC4500 General Purpose(CPU_45A-V2)

This document describes the features and hardware details of the CPU Board XMC4500 General Purpose (CPU_45A-V2) designed to work with Infineon s XMC4500 Microcontroller. This board is part of Infineon sHexagon Application Kits.

The CPU_45A-V2 board houses the XMC4500 Microcontroller and three satellite connectors (HMI, COM, ACT) for application expansion. The board along with satellite cards (e.g. HMI_OLED-V1, COM_ETH-V1, AUT_ISOV1 boards) demonstrates the capabilities of XMC4500. The main use case for this board is to demonstrate the generic features of XMC4500 device including toolchain. The focus is safe operation under evaluation conditions. The board is not cost optimized and cannot be seen as reference design.

通用板CPU_45A-V2主要特性:

The CPU_45A-V2 board is equipped with following features

XMC4500 (ARM reg; Cortex -M4) Microcontoller, LQFP-144

Connection to XMC4500 satellite cards via satellite connectors COM, HMI and ACT

USB OTG Host/Device support via micro USB connector

Debug options

Cortex Debug connector 10-pin (0.05”)

Cortex Debug+ETM connector 20-pin (0.05”)

DriveMonitor2 Stick connector

Reset push button

32MBit quad SPI flash memory

Boot from Embedded Flash, UART or CAN

Ready for power consumption analysis

5 LED s

3 Power indicating LED s

1 GPIO (P3.9) LED

1 RESET LED

Potentiometer, connected to analog input P14.1

Power supply

Via micro USB connector in USB device mode

Via satellite connector pins (COM/ACT satellites cards can supply power to CPU board)

RTC backup battery

长腿美女

出名小说全文免费阅读

寿眉的养殖方法

推理的故事